Cattlefeeder of PRONAR ASIA VMP10

The cattlefeeder of PRONAR ASIA VMP-10 is intended for work as in large, and small farms. Application of cattlefeeders gives the chance to prepare polnoratsionny forages, including different components in a diet that influences increase of a daily yield of milk of milk.

The cattlefeeder of PRONAR ASIA VMP-10 differs in a strong and stable design. The covering of the bunker is made of steel 8 mm thick, an a floor — 20 mm. The mixer screw in a cattlefeeder of PRONAR ASIA VMP-10 has nine knives (with a possibility of installation in three provisions). On both sides of the bunker on diagonal two antiknives with a mechanical control, a from sides the dosing hatches with hydraulic opening intended for distribution of a forage are established.

The cattlefeeder of PRONAR ASIA VMP-10 is equipped with 4-dot weight system with the LCD display. Weighing facilitates preparation and a dosage of a forage. The drive of a cattlefeeder is carried out from VOMA of a tractor, a makes need for power apprx. 45 kW.

For service of a cattlefeeder it is possible to use the PRONAR wheel loaders, captures for rolls and carvers of a silo, also productions PRONAR, 1.25 or 1.5 m wide.

Basic complete set

• Chassis frame: rectangular of the closed profiles
• Dyshlo: motionless for connection with lower or the top traction coupling device of a tractor
• Draft of a dyshl: rotary with a diameter of a loop fi 50
• Support of a dyshl: telescopic simple
• Single-wire pneumatic brake system with the manual regulator of force of braking
• The parking brake with a crank
• Electric lighting
• Mixer type: 1 vertical screw
• Replaceable knives on the vertical screw: — 3 knives near a floor from a lame vanadiyevo-volframnoy became with the increased durability degree on an istirayemost — the 7th top a knife from a lame vanadiyevo-volframnoy became with the increased durability degree on an istirayemost
• Possibility of installation of knives in three provisions. The 2nd opposite knives in the bunker increase the speed of process of crushing of a forage
• Hydraulically adjustable 2 lateral vygruzochny windows
• Two ssypny trays are lower than vygruzochny windows for a careful dosage of fodder mix. In work ssypny trays do not influence cattlefeeder dimensions.
• Two lateral rubbers in vygruzochny windows the forages and forages giving the chance of uniform distribution limiting distribution.
• Electronic scales with the LCD display for definition of operating time of the screw and weighing of fodder mix.
• Footboard with steps on both sides of a cattlefeeder for control of service and periodic washing of the loading bunker
• The top ring the forages protecting from oversleeping
• Two-component painting
• Painting of a landing, ssypny tray: color red RAL3000
• Painting of the chassis, bunker: color green RAL6010

Additional complete set

• Dyshlo: motionless for connection with the top traction coupling device of a tractor
• Draft of a dyshl: rigid with a diameter of a loop fi 40
• Two-wire pneumatic brake system with the manual regulator of force of braking
• Hydraulic brake system
• Possibility of increase in tonnage of the bunker by 2 m3 (to 12 m3 of the general tonnage) by installation of an additional extension of 250 mm
• Possibility of reduction of tonnage of the bunker by 2 m3 (to 8 m3 of the general tonnage) by dismantle of an additional extension of 250 mm
• The Shaft of Selection of Power (SSP) for accession to a tractor
• Electronic scales with the LCD display the size it is less standard for installation in a tractor
• The programmable indicator integrated with computer programs for management of distribution of a forage, with a possibility of a broadcast of data
• Wedges under wheels with pockets
• Spare wheel
• Bunker capacity with an extension of 250 mm
• Bunker height inside without extension