The EO2626 excavator with a maxillary ladle
- Customer pickup,
- Courier
- In detail
- Principle of operationCyclic action (one-bucket)
The EO-2626-01 excavator loader with the displaced axis of digging is made on the basis of the MTZ-92P (4h4) tractor. The excavator belongs to the class Citymaster, is developed taking into account the best achievements of domestic and foreign engineering industry.
The EO-2626-01 excavator loader is intended for work in the constrained city conditions. The movable axis of digging at which the maximum shift of the carriage reaches 1300 mm allows to carry out development of soil in close proximity to fences and walls of buildings, and also excavator works of big width from one installation of the excavator. At the same time the maximum depth of digging reaches 4,34 m.
Stability of the EO-2626-01 excavator loader when digging is increased, durability of an arrow and handle due to change of a design is increased. The excavator equipment develops in the direction, perpendicular to the movement of the excavator. In this regard overall dimensions of the car on length significantly decrease that increases its maneuverability during movement of a building site.
The EO-2626-01 excavator loader is completed with the modern hydrodistributor with the built-in safety and cavitational valves of production of Hidrocontrol firm (Italy). The hydrodistributor provides smoothness and accuracy of work of the excavator equipment, combination of operations, protects the equipment from mechanical damages at the operator's mistakes. Fast installation of section for the additional equipment is possible.
Governing bodies are located ergonomically at arm's length. Control of the excavator is exercised by means of two joysticks located on the lateral control panel under the right hand of the operator.
Technical characteristic of excavator loader EO-2626-01so a movable axis of a dropping and a maxillary ladle on the basis of a tractor Belarus 92P
Name of indicators |
Unit of measure |
Size |
The basic car – the Belarus tractor |
92P |
|
Overall dimensions in transport situation: | ||
Length |
mm |
6500±100 |
Width |
mm, no more |
2400 |
Height |
mm |
3800±50 |
Maximum transport speed of movement |
km/h |
18,0-0,3 |
The largest radius of digging |
m |
6,85 |
The largest depth of digging |
m |
4,3 |
The greatest height of unloading of the excavator |
m |
3,5 |
The overcome bias of a firm dry way |
º, not less |
13 |
Road gleam |
mm, not less |
190 |
Pressure in an excavator loader hydraulic system |
MPa (kgf/cm2) |
16±1 (160±10) |
Hinged loading equipment: | ||
Nominal loading capacity |
t |
1,0 |
Nominal capacity of the main ladle |
m3, not less |
0,8 |
Width of the cutting ladle edge |
mm, not less |
2300 |
Hinged excavator equipment: | ||
Type of the equipment — the return shovel | ||
Nominal capacity of a ladle |
m3, not less |
0,28m3 |
Ladle width on the cutting edge |
mm, not less |
580 |
The ladle is additional: | ||
Nominal capacity of a ladle |
m3, not less |
0,1m3 |
Ladle width |
mm, not less |
310 |